« Back

Kerbstone Paint

Roadex Kerbstone Paint has specially been formulated for concrete surface and has proven to be an excellent paint on exterior. The Alkyd Resin Binder with high solid contents gives very good adhesion to concrete surface and UV stabilize pigment give extra life. It is thin able with oil, and mineral turpentine once dried the film shows excellent resistance to water, abrasion and weather.
Technical Data
Viscosity Thixotropic easily applied by brush, Roller, Spray
Binder Type Modified Alkyd Copolymer
Pigment Weather Resisting pigments and pigments extenders
Colour Available White, Yellow, Black
Application Brush, Roller or Spray
Spreading Rate 9 to 11 Sq M per Liter/Coat at 50 Micron DFT
Drying time a) Surface Dry : within 120 minutes
b) Hard Dry: 6 Hour
No of Coats 2-3 coats
Storage Stability One year when stored properly, in original sealed container at 15 to 35 C
Packing 3.64 Liter Containers
Application Method

» Surface must be clean, dry, and in sound condition. Remove all oil, dust, grease, dirt, loose rust, and other foreign material to ensure adequate adhesion.
» For better coverage a thin coat of Roadex KB Primer can be applied.
» Apply Roadex Kerbstone Paint after dilution with white spirit from (10%-30%) to reach the suitable application viscosity.
» Apply 2 -3 coats minimum to attain the uniform finish

Storage & Packaging

» Available in 3.64 Gallon Pack.
» Store in dry and shaded place and avoid direct sun light.
» Two years from production date if stored in original sealed container at room temperature.


» Avoid contact with skin, eyes, or inhalation while handling material.
» Use protective clothing, Gloves, Masks and Goggles etc.
» Environmentally safe.